Advantech ARK-5261, User Manual

Page: 31 / 78

23 ARK-5261 User Manual
Chapter 2
H
/W Installation
4. Adjust the depressed rubber height on the top bracket, to fit the PCI expansion
card.
Figure 2.22 Adjust the depressed rubber height
5. Replace the top bracket and top cover and secure with screws.
2.4.4 Mini-PCIe module installation
ARK-5261P series supports 3 x PCI & 1 x Mini-PCIE (full size socket)
1. Refer to 2.4.2 step 1~2 to remove the top cover and top bracket.
2. Install the Mini-PCIe module and secure screws.
3. Replace the top bracket/cover and secure with screws.
Rotate the rubber
to adjust its height
Note! If your Mini-PCIE module is a Wifi module, there are two antenna holes
at the rear side of ARK-5261. Please remove the steel cutouts in the
antenna hole before assembling the antenna.
Note! If ARK-5261 uses a Wifi antenna, the wall-mount bracket will not need to
be assembled.
Note! ARK-5261 supports both Mini-PCIe 1.1 & 1.2 and setting by jumper. For
detailed information, please see 2.2.2 Jumper List section.