3
ARK-5261 User Manual
Chapter 1
G
eneral
Introduction
1.2.2
Display
Chipset:
Chipset integrated Intel HD Graphic
Memory Size:
Up to 224 MB of dynamic video memory allocation
Resolution:
–
VGA: Supports up to 2560 x 1600 @ 60 Hz
1.2.3
Ethernet
Chipset:
–
LAN1:Intel I211
–
LAN2: Intel I211
Speed:
10/100/1000 Mbps
Interface:
2 x RJ45
Standard:
Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.ab.
1.3
Chipset
1.3.1
Functional specification
1.3.1.1
Processor
1.3.1.2
Chipset
Processor
Intel® Celeron® Processor J1900 at 2GHz with 2M Cache, up to 2.41
GHz
Manufacturing Technology: 22nm
Memory
Intel® Celeron® Processor J1900
Support DDR3L-1333 MHz (1.35V) up to 8GB
SODIMM Socket:
–
204-pin SO-DIMM sockets*2
Graphic and
Video
Controllers
Chipset integrated Intel HD Graphic
Supports Intel® Quick Sync Video
Supports Intel® Virtualization Technology (VT-x)
Supports Intel® 64
Supports Enhanced Intel SpeedStep® Technology
VGA: supports resolution up to 2560 x 1600 @ 60Hz
VGA Connector on board: D-SUB 15P
SATA Interface
SOC: Intel Bay trail J1900
Two (2) SATA Revision 2.0 ports (eSATA capable)
Legacy IED (including IRQ)/Native IDE/AHCI appearance to OS
Partial/ Slumber power management modes with wake
Capable of 3Gbit/s transfer rate
Audio Link
SOC: Intel Bay trail J1900
Supports HD Codec
Supports Link for Audio and Telephony CODECS
Summary of Contents for ARK-5261
