AMAX-175x Series User Manual
2
Products in the AMAX-175x Series are used to increase the number of digital input/
output channels for an AMONet RS-485 distributed motion control network. These
extension slave modules connect serially by a simple and affordable Cat.5 LAN
cable, reducing the wiring between driver and controller. This is very suitable for
highly integrated machine automation applications.
1.1
Features
Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are sup-
ported and switchable
Onboard screw terminal for direct wiring
2,500 V
RMS
Isolation voltage
Suitable for DIN-rail mounting
Board ID is switchable
Easily visible LED indicators on board to do diagnosis
1.2
Specifications
1.2.1
General
BUS TYPE
AMONet RS-485
Certifications
CE, FCC Class A
Connectors
(1) RJ-45 x 2 are for communication port
(2) I/O points use screw terminal type connector
LED Indicators
Power, Run, Status, Isolated Digital I/O
Power Consumption
600mW typical, 2 W Max.
Power Supply for
Module
VS: 24 Vdc
±
10%
Power Supply for
Digital Input/Output
VEX: 10-30 Vdc
