Advantech AIMB-275 A2 User Manual Download Page 48

Page: 48 / 120

AIMB-275 A2 User Manual



Security Device Support [Enable]

Enable or Disable BIOS support for security device.



TPM Enabled State [Enabled]

3.2.2.4

ACPI Settings



Enable ACPI Auto Configuration [ Disabled ]



Enable Hibernation [ Enabled ]

Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This
option may be not effective with some OS.



ACPI Sleep State [ S3 (Suspend to RAM) ]

Select ACPI sleep state the system will enter when the SUSPEND button is
pressed.



Lock Legacy Resources [ Disabled ]

S3 Video Repost [ Disabled ]

Note!

TCG EFI Protocol and INT1A interface will not be available.

Note!

TPM function requests Hardware design supported and BIOS enabled
in parallel.

Summary of Contents for AIMB-275 A2

























































































































Search results

Summary of Contents for AIMB-275 A2

Reviews:

Related manuals for AIMB-275 A2

Brands by name

Popular brands

Advantech AIMB-275 A2, User Manual

Search results

Summary of Contents for AIMB-275 A2

Reviews:

Related manuals for AIMB-275 A2

Brands by name

Popular brands