manualshive.com logo in svg

Advantech AIMB-242, User Manual

Share
Download
Advantech AIMB-242 User Manual Download Page 61

51

AIMB-242 User Manual

Chapter 3

B

IOS Operation

 

Active Processor Cores

Number of cores to enable in each processor package

Overclocking lock

FLEX_RATIO (194) MSR

Intel Virtualization Technology

Enable or disable Intel virtualization technology

Hardware Prefetcher

To turn on/off the MLC streamer prefetcher

Adjacent Cache Line Prefetch

To turn on/off prefetching of adjacent cache lines.

CPU AES

Enable or disable CPU Advanced Encryption standard instructions

Boot Performance Mode

Select the performance state that the BIOS will set before OS handoff.

Intel Speed Shift Technology

Enable or disable Intel speed shift technology

Intel SpeedStep (tm)

Allows more than two frequency ranges to be supported.

Turbo Mode

Enable or disable turbo mode

Package Power Limit MSR Lock

Enable or disable locking of package power limit settings.

Configure TDP Boot Mode

Configurable TDP Mode as Nominal/Up/Down/Deactivate TDP selection. Deac-
tivate option will set MST to Nominal and MMIO to zero.

Configure TDP Lock

Enable or disable configure TDP lock. 

Summary of Contents for AIMB-242











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands