7
AIMB-242 User Manual
Chapter 1
G
eneral
Information
1.6
AIMB-242 Board Diagram
Figure 1.3 AIMB-242 Block Diagram
1.7
Safety Precautions
Intel Xeon,
6th Gen Core i7/i5/i3
BIOS
Infineon TPM 1.2/2.0
(Optional)
Audio Codec
Realtek ALC892
1 RS-232 & 1 RS-232/422/485,
PS/2, WDT, 8 GPIO
Skylake QM170/
CM236 PCH
LS Pcom
DDR4 2133 MHz SO-DIMM
PCIe x 16 (Gen 3)
DDR4 2133 MHz SO-DIMM
Channel A
PCIe x 16
Channel B
GbE LAN1: Intel I219LM
Full size Mini PCIe colay mSATA
Embedded Controller
EC IT8528E
M.2 (B Key)
LPC
HD A
udio
SPI
Display Port 1.2
Display port
Display Port 1.2
2 SATA III Ports
1 USB2.0 Ports
8 USB3.0 Ports
Display port
HDMI
PCIe x1
SATA/PCIe x 1
SATA/ PCIex2
USB
USB
GbE LAN2: Intel I211AT
PCIe x1
Half size Mini PCIe
USB/PCIe x 1
SATA 3
USB 2.0
LVDS 24/48 bits
eDP (optional)
USB 3.0
Display port
Warning! Always completely disconnect the power cord from chassis whenever
you work with the hardware. Do not make connections while the power
is on. Sensitive electronic components can be damaged by sudden
power surges. Only experienced electronics personnel should open the
PC chassis.
Caution! Always ground yourself to remove any static charge before touching the
motherboard. Modern electronic devices are very sensitive to electro-
static discharges. As a safety precaution, use a grounding wrist strap at
all times. Place all electronic components on a static-dissipative surface
or in a static-shielded bag when they are not in the chassis.
Caution! The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to manufacturer's instructions.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.
Summary of Contents for AIMB-242
