manualshive.com logo in svg

Advantech AIMB-232, User Manual

Share
Download
Advantech AIMB-232 User Manual Download Page 72

AIMB-232 User Manual

60

7.1

Introduction

The AIMB-232 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes
Intel I219LM GbE PHY (LAN1) and Intel I211AT GbE(LAN2) that offer bandwidth of
up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating
Gigabit Ethernet at 1000 Mbps.

7.2

Features

Integrated 10/100/1000 Mbps transceiver

10/100/1000 Mbps triple-speed MAC

High-speed RISC core with 24-KB cache

On-chip voltage regulation

Wake-on-LAN (WOL) support

PCI Express X1 host interface

7.3

Installation

The AIMB-232’s Intel I219LM GbE PHY (LAN1) and Intel I211AT GbE(LAN2) Gigabit
integrated controllers support all major network operating systems. However, the
installation procedure varies from system to system. Please find and use the section
that provides the driver setup procedure for the operating system you are using.

Note!

Before installing the LAN drivers, make sure the CSI utility has been 
installed on your system. See Chapter 5 for information on installing the 
CSI utility.

Summary of Contents for AIMB-232





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands