background image

AIMB-221 User Manual

54

3.3

Standard CMOS Setup

Figure 3.2 Standard CMOS Features Screen

3.3.1

Date

The date format is: 
<day of the week>, <month> <day of the month> <year>.

3.3.2

Time

The time format is <hour> : <minute> : <second>, based on the 24-hour clock.

3.3.3

IDE channel 0/1 Master/Slave

!

IDE HDD Auto-Detection:

 Press "Enter" to select this option for automatic 

device detection.

!

IDE Device Setup:

Auto:

 Automatically detects IDE devices during POST.

None:

 Select this when no IDE device is used. The system will skip the auto-

detection step to make system start up faster.

Manual:

 Use this for manual configuration.

!

Access Mode:

 The options are CHS/LBA/Large/Auto

!

Capacity:

 Capacity of currently installed hard disk.

!

Cylinder:

 Number of cylinders

!

Head:

 Number of heads

!

Precomp:

 Write precomp

!

Landing Zone:

 Landing zone

!

Sector:

 Number of sectors

3.3.4

Drive A / Drive B

This category identifies the types of floppy disk drives installed in the system. The
options are: None/360 K, 5.25"/1.2 M, 5.25"/720 K, 3.5"/1.44 M, 3.5"/2.88 M & 3.5".

Summary of Contents for AIMB-221













































































































Reviews: