Easy Setup
Power On Computer
1.
Model: AIM-35AT Rating 5 Vdc or 5.15 Vdc / 3.0A
2.
This product is intended to be supplied by a UL
Listed Power Adapter( Chicony
：
A16-018N1A) or
DC power source, rated 5.0 - 5.15 Vdc, 3A min. for
model AIM-35AT, and Tma 50 degree C. Please
contact Advantech for further information and
assistance.
3.
The product is equipped with shipping mode for
battery protected and power saving, please charge
the embedded battery of the computer: Connect
the Micro USB adaptor on the AIM-35AT
(AIM8IAC) computer. (“H” on the description of
parts.) Please charge for at least one hour when
you use this computer for the first time.
4.
Push the Power button (“J” on description of parts.)
for 2~3 seconds to start the computer.
5.
While the computer is running, push the power
button for 1 second will disable LCD backlight for
power saving. Push the power button again will
enable the backlight again; press the power button
for 10 seconds while computer is running, the
system will shutdown.
6.
Environment:
Operating Temperature(Charging): 0°C ~+40 °C
Operating Temperature(Discharging): -10°C
~+50 °C
Storage: -20°C ~ +60°C
7.
There will be “ADVANTECH” logo upside down
while first boot up. This scenario will be disappear
after 2
nd
boot up and won’t influence functions and
usage.
Safety Instructions
Please read these safety instructions carefully and follow
these instructions for use. Repair of the device may only
be carried by trained service personnel. Advantech
recommends that a service contact be obtained with
Advantech service and that all repairs also be carried out
by them; otherwise the correct functioning of the device
may be compromised.
WARNING! Because of the danger of electrical shock,
never remove the cover of a device while it
is in operation or connected to a power
outlet.
If one of the following situations arises, have the
equipment checked by service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated the equipment.
• The equipment has been exposed to moisture.
• The equipment does not work well, or you cannot get it
to work according to the user’s manual.
• The equipment has been dropped and damaged.
• The equipment has obvious signs of breakage.
Disconnect this equipment from any AC outlet before
cleaning. Use a damp cloth. Do not use liquid or spray
detergents for cleaning and keep this equipment away
from humidity.
CAUTION! To avoid short-circuits and otherwise
damaging the device, do not allow fluids to
come in contact with the device. If fluids are
accidentally spilled on the equipment, remove
the affected unit from service as soon as
possible and contact service personnel to
verify that patient safety is not compromised.
Please check the battery if your computer
clock is unable to keep accurate time or the
BIOS configuration is reset to default.
Summary of Contents for AIM-35AT Series
Page 12: ......
