ADAM-6541 User Manual
12
2.5.2 Connection to other Hubs or Switch
ADAM-6541 has an RJ-45 port that supports the connection to 10Mbps
Ethernet or 100Mbps Fast Ethernet, and half or full duplex operation.
ADAM-6541 can be connected to other hub or switch via a two-pair
straight through cable or crossover cable. The connection can be made
from ADAM-6541’s ports to other Hub or Switch, such as MDI-X port or
uplink MDI port.
ADAM-6541 supports auto crossover to easily and flexibly network
users’ connections. You can connect any RJ-45 (MDI-X) station port on
the switch to any device such as a switch or a bridge or router.
2.5.3 Connection to fiber network
Connecting to the fiber network segment with three-bud fiber. You can
use fiber standards via 50/125, 62.5/125 µm (Core/Clad). With fiber
optic, it transmits speed up to 100 Mbps and you can prevent noise inter-
ference from the system and transmission distance up to 2 km.
2.5.4 Power Connection
You should take the following steps to connect ADAM-6541 power.
1.
Connect the power cable to 2-pin connector
2.
Connect power cable to power adapter
Note:
Please attach a dust cover to the unused fiber port for protection.