Advantech ACP-7000, User Manual

Page: 24 / 52

ACP-7000 User Manual 14
3.1 The Front Panel of ACP-7000
On the front panel, there is one Power switch, two System Reset buttons, one Alarm
Reset button, a dual USB port, and a PS/2 connector. There are nine LED indicators
on the lockable front door. Their individual functions are described below.
3.1.1 Switch, Buttons, and I/O Interfaces
Momentary Power switch : Press this button to turn the system power on or off.
Please use system shutdown or press this switch for few seconds to turn off the sys-
tem ATX power.
Alarm Reset button : Whenever a fault occurs in the system (e.g., fan failure or the
temperature in the chassis is too high), the audible alarm will be activated. Pressing
this button will stop the alarm from beeping.
System Reset button : Press the button to reboot the system (up to two systems).
Dual USB port : Connect USB devices to the system with this port.
PS/2 connector : Connect a PS/2 keyboard to this connector
.
Figure 3.1 Switch, buttons and front I/O interfaces
Momentary Switch or
On/Off Switch
Keyboard connectors
Dual USB and PS/2
System Reset 1
System Reset 2 (optional)
Alarm Reset