5
Chapter 1 General Information
Provides Composite video and S-video outputs via RCA (composite)
connector and S-video connector
Supports 640 x 480 and 800 x 600 input resolutions
Supports Windows© 95/98/NT and Windows XP drivers
Over-scan, under-scan and position adjustable
Auto-detection of TV presence met Interface
1.3.6 PCI bus Ethernet interface
•
Chipset:
REALTEK RTL8139 (Option Intel 82559) Ethernet controller
•
Ethernet interface:
IEEE 802.3U compatible 100/10Base-T interface.
Includes software drivers and boot ROM
•
Wake-on-LAN:
Supports wake-on-LAN function with ATX power control
1.3.7 Mechanical and Environmental
•
Dimensions (L x W):
EBX form factor, 203 x 146 mm (8" x 5.75")
•
Power supply voltage:
+5 V ±5%, +12V ±5% (PCM-9575 rev A101, A102)
+5 V ±5% (PCM-9575 rev A103)
•
Power requirements:
Max:
4.5A @ +5V, 0.55A @ +12V (within 5ms after power on) (rev A101,
A102)
4.5A @ +5V (rev A103 or higher)
Typical:
3.3 A @ +5V, 0.08A @ +12V (with 256 MB DRAM, Ezra 800 MHz
CPU)(rev A101, A102)
2.78A @ +5V, 0.08A @ +12V (with 256 MB DRAM, Eden 400 MHz
CPU)(rev A101, A102)
3.4 A @+5V (with 256MB DRAM, Ezra 800 MHz CPU) (rev A103 or
higher)
2.88A @+5V (with 256MB DRAM, Eden 400 MHz CPU) (rev A103 or
higher)
•
Operating temperature:
0 ~ 60°C (32 ~ 140°F)
•
Operating humidity:
0% ~ 90% Relative Humidity, Noncondensing
•
Weight:
0.64 kg (weight of total package)
Summary of Contents for 100/10
