Maintenance
DLT-SA6100 Screen Blanking Solution, Manual V1.00
25 / 27
9. Maintenance
9.1. Manufacturer and authorized service center
Only the manufacturer and its authorized service centers are permitted to perform the following
measures:
−
Firmware updates
−
Repairs and modifications to the
DLT-SA6100 Sensor Stick
The legal warranty shall apply. It expires if the customer performs measures on the device that
are only permitted to be performed by the manufacturer and it’s authorized Service Centers.
9.2. Customer: Regular inspection and maintenance
Perform regular checks that the DLT-SA6100 Sensor Stick is securely fixed in position
Vehicle mounted terminals are subjected to high loads due to vibration and shocks.
The
DLT-SA6100 Sensor Stick
is designed especially for this usage. However, the
DLT-
SA6100 Sensor Stick
may loosen in some circumstances, meaning functionality may be
restricted.
WARNING
Risk of accident if the DLT-SA6100 Sensor Stick becomes loose during ongoing
operation.
If the
DLT-SA6100 Sensor Stick
becomes loose, the sensors will no longer detect whether or
not the vehicle is stationary or moving. Blanking is no longer guaranteed in this situation, and
the driver may be distracted from driving.
Carry out checks on a regular basis (depending on the load and environmental conditions,
e.g. once a month) to ensure that the
DLT-SA6100 Sensor Stick
is securely fixed in the
USB port.
Software updates
Download of
ADLoG Screen Blanking Solution
software available on download center can be
done by customer.
