Initial start-up
16 / 27
DLT-SA6100 Screen Blanking Solution, Manual V1.00
7.1.1.
Notes for ADLoG vehicle mounted terminals
Connect the
DLT-SA6100 Sensor Stick
to a USB port underneath the cable cover of the
ADLoG vehicle mounted terminal.
Do not use the service USB port underneath the antenna as the stick can be easily
removed here. In addition, the antenna can no longer be closed due to the stick, meaning
the IP protection rating of the vehicle mounted terminal is no longer guaranteed.
To access the USB ports underneath the cable cover, this cable cover on the vehicle mounted
terminal must be opened and closed correctly. Please note the following:
Work on the ADLoG vehicle mounted terminal is only permitted to be performed by
adequately qualified, skilled personnel:
Follow the instructions in the relevant ADLoG vehicle mounted terminal manual.
Figure 7.1: Example ADLoG VMT: DLT-V83 with cable cover opened, 3 USB slots
7.2. Download DLT-SA6100 Screen Blanking Solution software
To install and configure
DLT-SA6100 Screen Blanking Solution
, you need a software
package which is available for download from Advantech website:
