Product:
Steam Mop
Input voltage:
220 - 240V / 50Hz
Power consumption:
900W
Maximum steam temperature:
103ºC
Water tank capacity:
350ml
Amount of water needed:
250ml
Heat-up time:
1-2 minutes
Usage time: approx.
9 minutes
Length of power cable:
7 metres
Nett weight:
1.8 kg
Safety Rules
•
Keep equipment away from children and pets.
• Steam is produced at 100ºC. Be careful, wear protective clothing, footware and protect your hands with heat
resistant gloves or mitts.
• Never place the steam mop on or near anyone’s foot.
• Do not leave the steam mop in one spot during use or while hot for more than 10 seconds.
• Do not overfill the water tank.
• Do not lift the steam mop with the main body vertical when filled with water. Water will leak throughout.
• Do not pull the unit by the power cable.
• Do not allow water or steam to enter light switches or power points mounted on the floor.
• To prevent overheating, unwind the power cord completely.
• Be careful of the “spiky” base when handling the unit.
• Do not leave the unit unattended.
• Fill with clean tap water. Filtered water preferred. Never add detergents or chemicals into the water tank.
• Use only genuine Advante replacement parts, unless otherwise stated.
Summary of Contents for StingRay
Page 1: ......