< Front >
< Back >
PRODUCT DESCRIPTION
1. Water Filtration Container Holder
2. POWER Indicator Light
3. HOT Water Indicator Light
4. COLD Water Indicator Light
5. HOT Water Safety Button
6. HOT Water Tap
7. COLD Water Tap
8. Drip Tray
9. Adjustable Feet
INSTALLATION
1. Select a indoor premise especially where there is free of direct sun rays, dampness and / or
rain to install this H2O Plus Water Filtration System.
2. Install the System on a hard, firm surface or flat floor. Unbalance installation may cause noise
and trembling.
3. Install the System where there is good ventilation condition. Poor ventilation condition may
cause a reduction of cooling effect. For this purpose, please leave at least 10cm of space
between the System and the wall.
4. Place the assembled water filtration container with the filters vertically on top of the Water
Filtration Container Holder
B
of the dispenser.
10. Top Cover Assembly
11. COLD Water Thermostat
12. HOT Water Heater Switch
13. COLD Water Tank
14. HOT Water Tank
15. Water Drainage Outlet
16. Condenser Coil
17. Compressor
18. Power Cord
19. EARTH
Summary of Contents for H2O Plus
Page 1: ......