Advantage SENTRA SRT-1045-300, Instruction Manual, Page: 27 / 90

Temperature Control Units : Sentra with T300 Control Instrument
Page: 27
Advantage Engineering, Inc.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729 Fax: 317-881-1277
Service Department Fax: 317-885-8683 www.AdvantageEngineering.com
3.3 INSTRUMENT OPERATION : BASIC USE
This unit features a touch screen interface panel. Press gently on the screen to navigate.
Do not press the screen with tools or other foreign objects when navigating. A physically
damaged screen voids the unit warranty.
A. Standby - Unit Powered But Not Running
1.
When the correct electrical power and adequate water supply pressure are
supplied, the unit can be started.
2. Ready. When the electrical power supply is engaged the display will illuminate.
The Standby Screen is displayed and shows the last selected Setpoint
temperature. The Ready Indicator is shown if the unit is ready for operations. The
Setup, Tools & Status and Power buttons are also displayed.
3. Alert.
An Alert Indicator will display if there is an error or mechanical issue with
the unit. Alerts are explained in detail elsewhere in this manual.
These Alerts prevent the unit from starting or operating and must be corrected
immediately.
• Water Pressure
• Motor Overload
• High Temperature
Touch Screen
Setpoint
200
°F
Setup
Ready
Standby
The Standby Screen with
Ready icon.