Customer Service 1-888-707-1880 11 Maurice Pincoffs Canada Inc.
©
2010
ENSURE TO FIRMLY TIGHTEN ALL NUTS AND BOLTS
YOUR UNIT IS NOW FULLY ASSEMBLED
MONITOR INSTRUCTION
FUNCTION BUTTONS
MODE:
Press to select functions between: scan, time, speed, distance, calorie and pulse.
Function:
Scan:
Displays each function in sequence every 6 seconds. The display loop is
Time - Speed - Distance - Calories - Pulse.
Time:
Shows your elapsed workout time up to 99:59
Speed:
Displays the current speed up to 99.9 mph.
Distance:
Displays the cumulative distance traveled during your workout up to 99.9 miles
Calorie:
Displays the cumulative calories burned at any given time during your workout up
to 999 cal.
Note: This is a rough guide used for comparison of different exercise sessions,
which cannot be used for medical purposes.
Gripped pulse: The monitor will display the user
’
s current heart rate in beats per minute during
the workout. Both hands must hold the gripped pulse for a heart rate reading
during your workout.
Remarks
1.
Monitor requires two
“
AA
”
batteries
2.
The monitor will turn on automatically by pressing any key or when you start
pedaling.
3.
The monitor will turn off automatically if no signal is detected for four minutes. All
values will be kept.
4.
Push and hold the mode button for three seconds to reset all values to zero.
5.
If monitor is illegible or partial segments appear, remove batteries and wait 15
seconds to re-install.
6.
Removing the batteries will reset all values to zero.
PDF created with pdfFactory trial version
www.softwarelabs.com
