3
I. Introduction
This instruction manual covers all facets of operation of the Advantage Controls MicroTron™ electronic
solenoid metering pump, including unpacking, mounting, electrical and plumbing connection, and start-up.
Safety, maintenance and repair, warranty, and factory information are also provided. Please read this manual
completely before proceeding. Observe safety protocols and heed all warnings and precautions.
Model Numbering
MicroTron™ Series R pump model numbers define the output, pressure and control functions present on a
particular pump. Your pump may be supplied with one or more of the options described in this manual. To
determine what features apply to your pump, check the model number label located on the pump.
Model
Number
Example
R
D 30 X 1 – P V C 1 - S
Control Function
C =
Conductivity Feed and Bleed
D =
Conductivity Bleed with a Selectable Inhibitor Timer
Output
30 =
30 gallons per day at 110 psi
55
=
55 gallons per day at 75 psi
15 =
15 gallons per day at 150 psi
17 =
17 gallons per day at 250 psi
Stop Function Options
X =
Standard
D =
Auto Stop
E
=
Flow Switch Assembly
G =
Flow Switch
Voltage
1 =
120 volt with USA plug (standard)
2 =
240 volt no plug
3 =
240 volt with specified plug
L =
120 volt with US plug and no control relay pigtail
Pump Head Material
P =
Glass-Filled Polypropylene (standard)
K =
Kynar
V =
PVC
Seat Material
V =
Viton (standard)
F =
Teflon
H =
Hypalon
Check Ball
C =
Ceramic (standard)
D =
Ceramic single on discharge
S
=
Stainless
Tubing Connections
1 =
3/8” PE, 75-200 psi (standard)
2 =
¼” PE, 250 psi models (standard)
P =
¼” MNPT
V =
3/8” Clear flexible suction tubing
Special Options
S =
3-function injection valve
NOTE:
This list represents our most popular options. If you have an option not covered, contact the
factory or your dealer for more details.
