Installation and Operation Manual S400 series
12
Press
menu
for 2 seconds, then
menu
until the "SIMUL" page is displayed, then activate
(on) or deactivate (OFF) simulation using the
and
keys.
Press
to exit setup mode, or time out after 10 seconds.
2.4.4. Key beeps
The key beeps can be activated or deactivated.
Press
menu
for 2 seconds, then
menu
until the "
bIP
" page is displayed, then activate
(on) or deactivate (OFF) the beep using the
and
keys.
Press
to exit setup mode, or time out after 10 seconds.
2.4.5. Resetting data in the memory
At any time, the memory of the Depth display can be returned to factory settings. To
do so, a memory reset command is accessible in the menu. The following parameters
are restored in the memory:
•
Depth unit:
Metres
•
Keel offset:
0
•
Depth alarms:
deactivated, high and low threshold at 0
•
Battery alarm:
deactivated, low threshold at 0
•
Countdown timer init.:
10 minutes
•
Simulation mode:
deactivated
•
Backlighting level:
0 (OFF)
2 seconds
2 seconds
