Installation and Operation Manual S400 series
11
To adjust this offset:
Press
menu
for 2 seconds, then on
menu
until the "
CAL
” offset page is displayed, then
adjust the required value using the
and
keys.
Press
to exit setup mode, or time out after 10 seconds.
2.4.2. Configuring the countdown timer
The duration of the countdown can be configured to the nearest minute, between 1
and 10 minutes.
Press
menu
for 2 seconds, then on
menu
until the "
tim"
setup page is displayed, then
adjust the required value using the
and
keys.
Press
to exit setup mode, or time out after 10 seconds.
2.4.3. Simulation mode
Simulation mode can be accessed via the Configuration menu. This mode is shown by
the icon
flashing on the LCD and remains active after power has been cut
off. It may be used for sales demonstrations of the product and features the following
functions:
•
Displays a coherent bottom profile (in distance and variation),
•
Displays the real supply voltage,
•
Transmits simulated data via the NMEA output.
•
Transmits simulated data via the communication bus.
2 seconds
2 seconds
