manualshive.com logo in svg

Advanipc AES-1210 Series, User Manual, Page: 45 / 52

Share
Download
Advanipc AES-1210 Series User Manual Download Page 45

45

 

 

     

 

3.3.3.6 

ACPI Configuration

 

 

Suspend to RAM 

Use this item to select whether to auto-detect or disable the Suspend-to-RAM feature. 
Select [Auto] will enable this feature if the OS supports it. 

ACPI HPET Table 

Use this item to enable or disable ACPI HPET Table. The default value is [Enabled]. 
Please set this option to [Enabled] if you plan to use this IMB to submit Windows 
certification. 

PS/2 Keyboard Power On 

Use this item to enable or disable PS/2 keyboard to turn on the system from the 
power-soft-off mode. 

PCIE Devices Power On 

Use this item to enable or disable PCI devices to turn on the system from the 
power-soft-off mode. 

RTC Alarm Power On 

Use this item to enable or disable RTC (Real Time Clock) to power on the system. 

USB Keyboard/Remote Power On 

Use this item to enable or disable USB Keyboard/Remote RTC to power on the system. 

USB Mouse Power On 

Use this item to enable or disable USB Mouse to power on the system. 

Summary of Contents for AES-1210 Series





















































Reviews:

No comments