3
B. CHARGE THE BATTERY
Power by built-in 3.7V lithium polymer battery, if the OLED screen
display low battery or
is flash, charge your remote
transceiver. While the battery of the Remote Transceiver is under
the battery charging, you can push the ”
” button to check
charging condition.
AC Power Supply
The remote transceiver equipped AC POWER SUPPLY /
AC ADAPTOR (Output Voltage: 4.2VDC – 5.5VDC and
with same USB plug), then you can charge the battery
indoors.
While the battery of
the Remote
Transceiver is under
charging.
Push the
button; the
screen will display
Battery charging.
C. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:
1. Spin up the Switch to select the transceiver button configuration you need and the OLED screen
will display the transceiver button configuration you select.
2. Within 5 seconds press the button
1
,
2
,
3
or
4
to remote control “button configuration” you selected.
Note: If 5 seconds of inactivity expired, or push the button, the transceiver button configuration mode
will exit.
Spin up the switch
to the page
1
Spin up the switch
to the page
2
Spin up the switch
to the page
3
Spin up the switch
to the page
4
Spin up the switch
to the page
5
Spin up the switch
to the page
6
Spin up the switch
resume to main page
.
D. SELECT THE TRANSCEIVER FEATURES:
1. Spin down the Switch to select the transceiver feature you need and the OLED screen will display
the features you select.
2. Press the button
1, 2, 3
or
4
once within 3 seconds after finished selection and the OLED screen will
change the display alternatively.
Note: If 5 seconds of inactivity expire, or push the button, the transceiver features program mode will
exit.
Summary of Contents for TRX970
Page 1: ...1 TRX970 OPERATION MANUAL...
