Advanced SG6540 Instructions Manual Download Page 11

WARRANTY

Advanced Specialty Gas Equipment Corp.,(the Company), warrants
to the initial purchaser of each pressure switch described herein, that
such equipment will be free from defects in material and workman-
ship which result in breakdown or failure under normal use during a
period of 12 months from date of shipment by the Company if used
and maintained according to Advanced Specialty Gas Equipment
written instructions. This warranty does not cover damage or mal-
function due to corrosion. Purchaser is aware that this equipment is
designed for specific applications and that using this equipment with
the wrong or improperly purged gas or at the wrong pressure may
damage or corrode the unit and cause personal injury. Purchaser
must confirm that this equipment is compatible with the gas being
passed through it. If there is any doubt about compatibility, consult
your Advanced Specialty Gas Equipment Corp. distributor.
The Company’s liability under this warranty shall be limited to the
repair, or at its option, replacement or refund of the purchase price, 
of such equipment which proves to be defective, provided; however,
that this warranty shall only apply if the purchaser (1) gives the
Company written notice within ten (10) days after discovery of such
defect, (2) immediately on discovery of the claimed defect, discontinues
all use of such equipment, and (3) returns such equipment freight
prepaid to plant of manufacture.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE
SPECIFIED HEREIN. NO WARRANTIES BY ADVANCED SPECIALTY
GAS EQUIPMENT CORP.(OTHER THAN WARRANTY OF TITLE 
AS PROVIDED IN THE UNIFORM COMMERCIAL CODE) SHALL 
BE IMPLIED OR OTHERWISE CREATED UNDER ANY APPLICA-
BLE LAW, INCLUDING BUT NOT LIMITED TO WARRANTY OF
MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PAR-
TICULAR PURPOSE. 

No claim against the Company of any kind,

whether as to equipment delivery or for nondelivery of equipment
and whether or not based on contract, warranty, negligence, strict 
liability in tort or otherwise, shall be greater in amount than the pur-
chase price of the equipment in respect of which such claim is made.
Without limiting the generality of the foregoing, Advanced Specialty
Gas Equipment Corp. shall not be liable for any special, indirect, or
consequential damage, such as failure of parts resulting from corrosion.
If it is determined by Advanced Specialty Gas Equipment Corp. that
the equipment is to be repaired or replaced under the terms of this
warranty, the cost of returning said equipment to the initial purchaser
will be paid by the Company. If, however, equipment returned to the
Company in connection with a claim under this warranty is found 
by the Company not to be defective hereunder, then such equipment
will be returned to the initial purchaser, shipping charges collect, and
additionally, a service charge will be paid by the purchaser to the
Company to cover the cost of handling and testing such equipment.

11

Summary of Contents for SG6540













Reviews: