www.advancedco.com
6
3.1 Mounting Instructions:
3.1.1 Mxp-049, Mxp-050, Mxp-051
The Mxp-049, Mxp-050 and Mxp-051 are power
supplies mounted within an IP30 steel enclosure. These
can accommodate 7Ah, 18Ah up to 38Ah capacity
batteries depending on enclosure size (refer to
specifications page).
When batteries are installed, the Mxp-051 can weigh in
excess of 16Kg. Use appropriate fixing hardware to
secure the panel to the wall.
For example, drill the required holes in the supporting
wall using a drill bit diameter 7.0 mm and plug with a
suitable 40mm long expansion plug. Affix the panel to
the wall with M5 screws (length 40mm) or No.10 screws
(length 1½”).
Ensure that there is sufficient space to allow the cover
to be removed / opened when the panel is finally
mounted.
An example of the Mxp-051 is shown opposite.
3.1.1.1 Mounting Peripheral Cards or OEM equipment.
Space is provided in which to mount ancillary equipment or printed circuit cards
5
.
3.1.1.2 Fixing Points and Dimensions
135
135
340
24
315
255
Power
Fault
Earth
Lead to
Cover
7Ah Enclosure
135
135
340
30
4
2
0
2
5
5
Power
Fault
Earth
Lead to
Cover
17Ah / 38Ah Enclosure
5
Advanced Electronics Ltd does not warrant that the equipment continues to satisfy the requirements for compliance with the EMC
Emissions Directive and Low Voltage Directive when equipment, other than that manufactured by Advanced Electronics Ltd and installed
in accordance with the supplied documentation, is mounted in the enclosure. Ensure continued compliance through appropriate testing
and/or notified body certification.
Knockouts
Space for
Peripheral
Cards
Mains Terminal
Block
Fixing Points x3
PSE
Status Indicators
