www.advancedco.com
6
2.4 Menu Functions
Press the MENU button. For Level 2 Menu insert and turn the “Access Enable” key or select Enable Controls
and enter a password.
[Level 1 Menu]
ENABLE CONTROLS
VIEW
LED TEST
[Level 2 Menu]
VIEW
TEST
OPERATING MODE
EXIT LEVEL-2
COMMISSION
Use the
buttons to select the required menu option. Press the
✔
button to select.
For full details of the menus, refer to the product manual 680-190. The following is a brief description of each
menu option.
VIEW
The menu permits the viewing of fault, panel internal operating conditions and the revisions of the operating
software.
LED TEST
Illuminates all LED indicators for a few seconds.
TEST
Test the Display as well as the LED indicators. It is also possible to test the operation of each button.
Test the internal buzzer
– this will sound for a few seconds when the option is selected.
OPERATING MODE
Alternative method of selecting the operating mode of the panel instead of using the front panel key-switch.
Selections are; Normal, Test and Engineer.
EXIT LEVEL-2
If the LEVEL-2 Menu has been enabled through the keyboard and password entry, this option will cancel this
access and lock the panel to Level-1 use only.
If the key is used for access, just turn the key back and remove to lock the panel functions.
COMMISSION
This is the menu function for configuration and is normally only used by the installer / maintenance contractor.
