Advanced AxisAX AX-PENN, Installation & Operation Manual

Page: 9 / 22

www.advancedco.com
9
2.3.2.2.1
Class X Ad-NeT-PluS Network

200 Network Nodes

Maximum Cable Length between Nodes 5000ft

Maximum Overall Cable Length 66000ft
Cable wiring must be minimum twisted shielded pair 18AWG to 20AWG. Connect the shield to the designated shield
terminals only.
Wire from the last network node “OUT” terminals back to the first network node “IN” terminals to form a complete loop
“ring”.
2.3.3 Peripheral Bus (P-BUS)
The AX-PENN (/ST7) can support sixteen (16) of each type of Advanced peripheral bus modules. Peripheral bus
modules must be located within 20 feet of the AX-PENN (/ST7) module within the same room. Below is a list of
available peripheral bus modules:
Document
AX-ASW-16 Switch Module with 16 Switches and 48 LEDs 682-020
AX-ACM-6 Fan/Damper Module 682-079
AX-LED16 LED Annunciator Module, 16 Red and 16 Yellow 682-020
AX-LED32R LED Annunciator Module, 32 Red 682-020
AX-LED32Y LED Annunciator Module, 32 Yellow 682-020
AX-I/O-48 16 Switch Input and 48 LED Driver Outputs 682-020
Figure 8– AX-PENN/ST7 (Class X) Ad-NeT-PluS Network Wiring