5. GETTING STARTED
1
2
3
5
8
9
10
11
7
4
6
1. LED Flashlight
Press Power button
momentarily to turn flashlight
on; press key again to shut
flashlight off.
2. Volume Control
Adjust the volume level by
rotating the volume control.
3. Channel Selector
Rotate channel selector to
select channel 1-16.
4. LED Indicator
Lights red while transmitting.
Lights green while receiving
a signal. Flashing red when
the battery voltage is low
while transmitting.
5. Accessory Jack
6. Microphone
7. Speaker
8. Power Button
Press and hold for 3 seconds
to turn on - release when you
hear a tone. Press and hold
for 3 seconds to turn off -
release when you hear tone.
Press momentarily to turn
flashlight on; press key again
to shut flashlight off.
9. Scan/Monitor Button
For Scan - press button for 1 second
to enable or disable scan. A single
beep indicates that scan has been
enabled. A double beep indicates that
scan has been disabled.
For Monitor - press for 3 seconds,
then the squelch is turned off,
meanwhile you can hear the
background noise. Release
the side key, then the
squelch is opened.
10. Push-to-Talk Button
Press it and speak in to the
microphone to call the
receiver; release it to
receive.
11. Antenna (detachable)
Summary of Contents for MINI PRO
Page 1: ......
