background image

at a proper distance is important since RF exposure decreases with increasing distance from the antenna. 
*Use only FCC-approved, supplied or replacement headsets, batteries, and accessories intended for use with 

this radio. Use of non-FCC approved headsets, batteries and accessories may exceed FCC RF exposure 

guidelines.

FCC License Information 

 

Your Advanced Wireless Communications radio operates on communications frequencies which are subject to 

FCC (Federal Communications Commission) Rules & Regulations. FCC Rules require that all operators using 

Private Land Mobile radio frequencies obtain a radio license before operating their equipment. Application for 

license must be made on FCC main form 601, and schedules D, E, and H. 
FAX: Forms can be obtained by fax from the FCC Fax-On-Demand system. Call 1-202-418-0177 from your fax 

machine and request document number 000600 for the form, schedules, and instructions. 

MAIL: Forms can be ordered by telephone, and will be sent to you by first class mail. Call the FCC Forms 

Hotline at 1-800-418-FORM (1-800-418-3676). 
INTERNET: Form 601 and instructions can be downloaded from the FCC Forms website at:  

http://www.fcc.gov/Forms/Form601/601.html

4

Summary of Contents for 106291

























Reviews: