Advanced Radio Air Safe, User Manual

Page: 5 / 12

5
Screens and Usage
Air Safe Start - up Screen
When you first power up the Air Safe you will see the start - up
welcome message with the software version number. After a
short time the Air Safe will move to the Run Mode Screen.
ADVANCED RADIO
FAILSAFE GEAR
SEQUENCER
VERSION X.XX
Run Mode Screen
Run Mode Screen shows the pressure monitor, it gives feed-
back about system (absolute) pressure. It also shows the cur-
rent gear position.
SYSTEM PRESSURE
150.0 PSI
GEAR POSITION
DOWN
PROGRAMMING MODE—To move to program-
ming mode press the joystick. This will take
you to the programming menu.
Programming Main Menu Screen
On the Programming menu use the joystick
↓ DOWN Arrow
and ↑ UP Arrow
to move between the different menu
items. As you move between the different menu items the se-
lected item will be highlighted with a white background.
Select “ FAIL SAFE ” to go to the Fail Safe setup page.
Select “ SEQUENCER ” to go to the Sequencer setup page.
Select “ FACTORY RESET ” to go to the Factory Reset page.
Select “ RETURN ” to return to the previous page.
FAIL SAFE
SEQUENCER
FACTORY RESET
RETURN