Call Button Kit Installation
(AND-BTN-KIT-1)
Advanced Network Devices
•
3820 Ventura Dr. Arlington Hts. IL 60004
847-463-
2237 •
www.anetd.com/user-support/
4
v1.5
<SIPConfig
promiscuous_mode="1"
push_to_talk_ip1="
20:46:F9:03:02:01
"
/>
2.
Reboot the device. A momentary
press of the push button will put
the two devices into a two-way
conversation, provided both
devices have microphones. Press
the button again to end the call.
AND Device to Phone Operation
1.
Configure the AND to register to
a SIP server.
•
If configuring the AND device
using on-board settings, access
the device’s web page
, and
select
Device Settings
→
SIP
.
Under
SIP GPIO Input Action
Settings
, set the
Push-to-Talk 1
parameter to the extension or
SIP ID of the phone or third-
party device to call when
pressing the button. Save the
settings.
•
If configuring the device using a
configuration file, add, or
modify the push_to_talk_ip1
parameter in the
SIPConfig
tag:
<SIPConfig
push_to_talk_ip1="2450"
/>
•
See
related
third-party
documentation for details on
setting up a SIP extension on the
AND device.
2.
Reboot the device. A momentary
press of the push button will dial
the phone or device specified by
the
programmed
extension
number. If the phone or other
device accepts the call, they will
be
put
into
a
two-way
conversation. Press the button
again to end the call.
ADDITIONAL RESOURCES
User Support:
https://www.anetd.com/user-
support/
Technical Resources:
https://www.anetd.com/user-
support/technical-resources/
AND Legal Disclaimer:
Static Electric Warning