ENGLISH
B-TWIG 8 MOBILE
| User manual
16
17
User manual
|
B-TWIG 8 MOBILE
17
desire controlling the system with the dedicated APP. It is possible to interrupt
the synchronization to the secondary system by pressing ABORT (Fig.4D) or
permanently disconnect it at the end of your session by pressing UNPAIR (Fig.4E)
Note
: For iPhone users it is not necessary to press this button as the
synchronization between two systems, carefully configured, takes place
automatically after 10 seconds after APP launch.
It is always possible to return to the main menu by pressing the green arrow
5.2
|
CHANNEL MENU SCREEN (Fig.3)
Press the desired channel button to enter this menu. Once entered, it is possible to view and
adjust the parameters of CH1-CH2-CH3, in detail:
- 3-band equalizer, HIGH/MID/LOW, operating from -12 dB to +12 dB
- HPF filter, frequency from 20 Hz to 400 Hz (only for CH1 and CH2 )
Once the adjustments have been made, you can return to the main menu by pressing the
green arrow.
5.3
|
BLUETOOTH
®
MENU SCREEN (Fig.4)
The B-TWIG 8 MOBILE system is equipped with a Bluetooth
®
5.0 stereo receiver, which
allows you to make a data connection with the APP and simultaneously stream audio from
your mobile device.
Press the button
to access this menu. Once entered, it is possible to enable or disable
the APP CONNECT and AUDIO STREAMING functions, in detail:
APP CONNECT ON
: if activated, allows data synchronization with the “ANT SPEAKER
CONTROLLER” app, available for Apple iPhone only. This function is already active in factory
setting. Anyway, be sure to activate this function before opening the APP from your phone.
APP CONNECT SLAVE
: if activated (Fig.4A), it configures the unit as an additional secondary
system (Slave) perfectly controllable via APP. In this way it is possible to choose between
Mono (Fig.4B) or Stereo (Fig.4C) listening. Make sure that the APP CONNECT control is set
to ON in the main system (Master)
AUDIO STREAMING ON
: if activated, allows audio streaming from your mobile device. This
function is already active in factory setting. Be sure to enable this function before pairing
your device via the Bluetooth
®
connection
PAIR
: if pressed, activates synchronization via Bluetooth
®
between the main (Master) and
secondary (Slave) systems The PAIR button is generically designed for those who do not
Fig.4D
Fig.4E
APP
ON
AUDIO
STREAMING
APP CONNECT
ON
ABORT
APP
ON
AUDIO
STREAMING
APP CONNECT
ON
UNPAIR
MONO
STEREO
Fig.4
Fig.4A
SLAVE
APP
ON
AUDIO
STREAMING
APP CONNECT
PAIR
APP
ON
AUDIO
STREAMING
APP CONNECT
ON
PAIR
Fig.4C
Fig.4B
APP
ON
ON
AUDIO
STREAMING
APP CONNECT
MONO
STEREO
UNPAIR
APP
L
R
ON
ON
AUDIO
STREAMING
APP CONNECT
STEREO
UNPAIR
MONO
Fig.3
CH1
LINE
HIGH
MID
LOW
HPF
12dB
-
0dB
0dB
210Hz
APP