Desk and Brackets
The desktop surface is made with a scratch resistant laminate surface and can be easily
cleaned with mild soap and water. For stains or graffiti, something like isopropyl alcohol and a
sponge should help. Don’t use harsh abrasive cleansers or cleaning pads. These will dull the
laminate finish.
The monitor bracket is constructed with powder-coated steel. This can be cleaned with most
non-abrasive chemicals.
Plastic mounting brackets are constructed from polycarbonate plastics. Alcohol based cleaners
should be avoided. Mild detergents and water are recommended.
Monitor
The monitor is NOT touch capable, and as such, are not glass coated for protection. The
monitor should be cleaned very carefully. Never spray directly onto the monitor, but onto the
cleaning cloth first. Below are some recommendations for cleaning,
● Specially designed LCD cleaning solution
● Use a micro-fiber cloth and avoid buffing or circular cleaning
● Wipe from side to side with gentle pressure
Troubleshooting
In the event that the Aegis Desk exhibits any abnormal behavior, please refer to the following
troubleshooting steps to help resolve the issue.
Printer isn’t printing?
● Occasionally the printer will go into a deep sleep mode. Test print a piece of paper and
that should wake the printer up. If this doesn’t work, turn off the printer for 10 seconds
before turning back on
● Check to make sure the printer is plugged in to both the electrical cable and the USB
connection to the computer
● Check the paper tray to make sure the printer is not jammed or out of paper
Aegis Desk Owners Manual v1a
www.advancedkiosks.com
| 15
