9
10
Turning on Main Switch
1. Shifting the switch to RUN position
then can turn on the power supply of
car.
2. Shifting the switch to OFF position
then can turn off the power supply of
car.
Key Switch
1. Plugging the key and turn right then
can turn on the key switch (Note:
Shifting the F/R switch to the middle
position before turning on key switch).
2. Turning left and then can turn off the
switch. Switch can be removed only at
this state.
Completely stopping car before shifting F/R switch. When shifting F/R
switch, please turn switch to middle position for 2s at first, then choosing
Forward switch or Reverse switch. Don't shift F/R switch in a hurry in
case that the sensor will be burnt or switch will be out of use.
Forward/Reverse Switch
The Forward/Reverse Switch is used to
shift the car to forward, reverse or
stop. Forward for upward, Reverse for
downward, Park for middle. When
choosing reverse switch, the reverse
buzzer sounds.
Combination Switch
1. Turn signal: Move the turn signal lever forward, left
turn signal flashes. At the same time, you'll be able to
see a flashing arrow directed to the left on your
instrument cluster. Move the turn signal lever
backward, the arrow directed to the right on.
2. Low beam: Front part of the lever can be pushed
and pulled. After the vehicle is started, push the lever
forward to turn on low bean and backward to turn off.
3. High beam: move the lever upwards (steering wheel
surface) to turn on high beam. Releasing the lever, it
will automatically return to original position, and the
high beam can be permanently on.
4. Horn: Press lightly on the end of lever, where horn
button is located.
Glove box lock
There are one glove box on each side of instrument
panel, which can be used to store goods. When the
glove box cover is not locked, press the lock head to
open the cover.
Unlock: Insert the key into the lock, rotate in the
clockwise direction to unlock, and then remove the key.
Locking: Close the box cover, insert the key and rotate
in the counterclockwise direction to lock, and then
remove the key.
Operation And Control
Operation And Control
