21
22
Brake Pedal Travel Adjustment
:
螺母
2
-
5m
m
CAUTION
Tire Replacement
1. Take out the wheel nuts, after the car is
totally still. Anything will be fine t
o
prevent it moving.
2. Elevate the car with a jack and take out
the tire and the screw bolt.
3. Use the steps above conversely, when
installing the tire.
Be sure the main switch be in the"off"
position, before you check the wheel or
braking system.
Brake Adjustment
The brake of this car can be adjusted by
yourself.
Please use your foot to press the braking
pedal, making sure it has been functioning
properly.
Wheel nut tightening torque:
Consult your AdvancedEV dealer
before using the car, if you have any
problem with the brake. Because
serious accident would be caused in
case of brake failure.
Do not loosen the brake cables
because of air leakage, which will
also affect the brake adjustment
and result in braking function.
1. To change the length of the push rod
and thus increase the brake pedal free
travel, firstly loosen the lock nut on the
brake master cylinder push rod, then
carefully turn the push rod in the
counterclockwise direction.
After adjusting the brake padel travel
properly, tighten the screw in time to
prevent it from loosening.
2. The brake pedal free travel can be
adjusted, but not frequently. It is
recommended to adjust the distance
between 2-5mm and increase the
length of the push rod by 1-2mm.
CAUTION
Before adjusting the brake, tread
the brake pedal several times to
adjust the brakes.
Maintenance
Maintenance
