background image

AE GLOBAL SERVICES

   

Please contact AE Global Services if you have questions or problems that cannot be resolved by
working through the provided troubleshooting. When you call Global Services, make sure to have the
unit serial number and part number. These numbers are available on unit labels.

Important

For returns and repairs, please call AE Global Services to get the correct shipping address.

Table 9. AE Global Services 24 X 7 contact information

Office

Contact

AE World Headquarters

Address:

  1625 Sharp Point Drive
  Fort Collins, CO 80525
  USA

Phone (24 hrs/day, 7 days/week):

  800.446.9167
  or
  +1.970.221.0108

Email: (We will respond to email by the next
business day.)

mailto:[email protected]

Thermal product support

Contact by phone or email:

  +1.360.694.7871

mailto:[email protected]

Power Control Module product support

Contact by phone or email:

  +49 (0) 2902 910370 10 (technical support

during German business hours)

mailto:[email protected]

High Voltage product support: HiTek Power,
Ltd.

Contact by phone or email:

  +44 (0) 1903 712400

mailto:[email protected]

High Voltage product support: UltraVolt, Inc.

Contact by phone or email:

  +1.631.471.4444

mailto:[email protected]

Advanced Energy

®

Thyro-PX

Anybus

®

 Ethernet IP

57010163-00A

Thyro-PX

Anybus

®

 Ethernet IP

12

Summary of Contents for Thyro-PX Anybus














Reviews: