CAUTION:
The module is heavy. Use two people to lift the module.
ATTENTION:
Le module est lourd. Il doit être soulevé par deux personnes.
TO LIFT THE UNIT
• Lift the unit by holding on to the front of the unit while also supporting the rear
of the unit.
INSTALLING THE UNIT
Installing Optional Modules
DANGER:
RISK OF DEATH OR BODILY INJURY. Disconnect and lockout/tagout all
sources of input power before working on this unit or anything connected to
it.
DANGER:
RISQUE DE MORT OU DE BLESSURES. Débrancher et verrouiller/étiqueter
toutes les sources de puissance d’entrée avant de travailler sur cet appareil
ou sur tout élément qui y est raccordé.
The optional modules may be shipped separately.
1. Verify that the unit is disconnected from all power sources.
2. Unpack each optional module at an ESD safe work space.
3. Plug each optional module into the unit.
When an Anybus module is inserted into the unit, guide the module towards the
left during insertion.
4. Secure each module with the two TORX
®
T8 screws provided with the module.
For additional module documentation, scan the QR code that corresponds to the
module (see the following table).
Advanced Energy
®
Thyro-PX
®
Power Controller
57010148-00G
Installation, Setup, and Operation
5‑15
