manualshive.com logo in svg

Advanced Energy Thyro-PX 1PX, User Manual

Share
Download
Advanced Energy Thyro-PX 1PX User Manual Download Page 106

AE GLOBAL SERVICES

Please contact AE Global Services if you have questions or problems, or if you need 
customer support. Before contacting AE Global Services, please work through the 
provided troubleshooting. When you contact Global Services, please include the unit 
serial number and part number. These numbers are available on unit labels.

☞

 

Important

For returns and repairs, please contact AE Global Services to get the correct 
shipping address.

Primary Contact Information

Visit the Advanced Energy website for local service and support contact information:

 

http://www.advancedenergy.com

Click on the service link at the top of the page.

Alternate Contact Information

If you do not have access to the Advanced Energy website, then use one of the 
following:

• Phone (24 hrs/day, 7 days/week):

  800.446.9167
  or
  +1.970.221.0108

• Email: (We will respond to email by the next business day.)

 

mailto:[email protected]

• AE World Headquarters

  1625 Sharp Point Drive

  Fort Collins, CO 80525 USA

For Power Control Module product support, contact by phone or email:

  +49 (0) 2902 910370 10 (technical support during German business hours)

 

mailto:[email protected]

RETURNING UNITS FOR REPAIR

Before returning any product for repair and/or adjustment, first follow all 
troubleshooting procedures. After following troubleshooting procedures, if your unit 
is unable to resume normal operation, contact AE Global Services and discuss the 
problem with a representative. Be prepared to provide the model number and serial 

Advanced Energy

®

Thyro-PX

®

 Power Controller

57010148-00G

Troubleshooting and Global Services

6‑5

Summary of Contents for Thyro-PX 1PX














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands