ACR350 Validator with QR Code Scanner
–
User Manual
Version 1.02
www.acs.com.hk
Page 27 of 61
4. Screw the
back cover
to the metal parts using PM4*25 screws (4 pieces).
5. Place the
O-ring
on top of the metal part. The exact position is shown in the photo below:
O-ring
Note
: This is where the
Connection Cable (ie, Power
Cord) will go through. Make
sure that the cables are out
so that they may be easily
connected to the ACR350
Validator later on.
Note
: This is where the
Connection Cable (ie, Power
Cord) will go through. Make
sure that the cables are out
so that they may be easily
connected to the ACR350
Validator later on.
