AMR220-C1
– User Manual
Version 1.03
www.acs.com.hk
Page 118 of 143
www.acs.com
.hk
6.3. Set up device pairing with Bluetooth USB dongle
Note:
This procedure will use the TI USB dongle as the Bluetooth adapter. Make sure that you have
installed the ACS Bluetooth driver before performing this procedure (see
To pair using this set up:
1. Plug in the TI Bluetooth USB dongle to your computer.
2. Windows will automatically install the device driver, indicated by the tooltip notification.
3. Wait while the device driver installs.
4. When it is ready to use, you can open the
Using the ACS Bluetooth Device
Tool. It automatically pairs the dongle to your system.