8
Attaching and detaching the 3.5mm Auxiliary Cable
To attach a 3.5mm auxiliary cable, first ensure you
have a cable with the correct 3.5mm connector, and
then fully push the cable into the 3.5mm connector
on the sound processor.
To detach the cable, grasp the connector close to the
sound processor and pull directly away and in line
with the sound processor.
Do not pull at an angle.
The sound processor must be in an Aux Enabled
Program, in order to listen to sound coming from the
auxiliary input. Consult your audiologist and/or fitting
report to verify that you have an Aux Enabled program.
User Controls
Power/Program Button:
Changing Programs
: The Chorus Sound Processor
can store up to 3 programs. With the sound processor
powered on, press the power/program button once,
for about 1 second, to advance to the next program.
The sound processor will advance back to program
1, when advancing from the last program in the
sequence (e.g. from program 2 to 1 if 2 programs are
present, or from 3 to 1 if 3 programs are present).
