Advance acoustic SIGMA 10, Getting Started

Page: 15 / 18

Packing and Care
To pack, lay nose wire on nose wire, so that
the rigid profiles lie flat on each other and at
the same height. This will also arrange that
all C­Wires are at the same level. Fold the
wing to the width of its inner bag and conti­
nue as follows: first fold the trailing edge
end to include all the C­Wire lengths, then
fold the leading edge over at a line below
the Rigid Foils. Finally fold the trailing half
over the leading edge side. Take note that
incorrect care will shorten the life of your
SIGMA 10. Do not leave the wing in the sun unnecessarily and never subject it to large
temperature changes. Always store your
SIGMA 10 in a dry place.