Fitting the optional foot stirrup
The optional foot stirrup, included in PROGRESS 3 LTF 91/09 certifica-
tion, should be fitted as follows:
The black loops at the ends of the stirrup support lines attach
to the small tapes loops below the carabiners
with small quick-
links (Maillons Rapides). The bungee holdbacks from the harness go
through the D rings at the front of the seat shell
, and should be
tied to the small loops halfway down the stirrup lines
– as short as
practical, but not under permanent tension.
A speed loop accelerate system is supplied with the foot stirrup.
ADVANCE recommend that only this speed system is used when flying
with the foot stirrup.
A split ring
connects the speed loop to the footrest so that the lo-
op can always be conveniently picked up by a foot while flying with the
foot stirrup.
Cockpit attachment
A cockpit can be supported from the small tape loops below the chest
strap, or from the main carabiners..
15