FORM NO. 041410 / HYDRO-RETRIEVER 2067 -
17
AFTER USING THE MACHINE
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
AFTER USE
1
Raise the squeegee, the scrub brushes, and the brooms.
2
Shake the dust control filter and empty the hopper.
3
Drain and flush the recovery tank.
4
Flush the vacuum hose and squeegee.
5
Remove and clean the squeegee tool.
6
Remove and clean the scrub brushes. Rotate the scrub brushes.
7
Wipe the machine with a damp cloth.
8
Perform all required maintenance before storage.
9
Move the machine to a clean, dry storage area.
10 Store the machine with the brooms, the squeegee and the scrub brushes in the UP position, and the tank covers open so that the tanks can
air out.
REPORT ANY DEFECT OR MALFUNCTION NOTED DURING OPERATION TO AUTHORIZED SERVICE OR MAINTENANCE PERSONNEL.
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
SHUTTING DOWN THE DIESEL/ GASOLINE ENGINE
1
Put all controls to the OFF position.
2
Raise the squeegee, the scrub brushes, and the brooms.
3
Place the Throttle Control Switch or Lever in the IDLE position and let the engine idle for 30 seconds.
4
Apply the Parking Brake.
5
Turn the Key Ignition Switch OFF and remove the key.
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
SHUTTING DOWN THE PROPANE ENGINE
1
Put all controls to the OFF position.
2
Raise the squeegee, the scrub brushes, and the brooms.
3
Turn the service valve on LP gas tank OFF.
4
Place the Throttle Control Switch in the IDLE position and run the engine until all the LP gas is dispelled from the line.
5
Apply the Parking Brake.
6
Turn the Key Ignition Switch OFF and remove the key.
