FORM NO. 56043110 - Exterra
™
-
87
ELECTRICAL SYSTEM
PROGRAMMABLE CONTROL OPTIONS
Automatic Shaker Operation:
FACTORY DEFAULT: ON
RANGE: ON, OFF
The dust control filter shaker can be programmed to automatically activate each time the main broom is turned off to automatically clean the filter.
To turn this feature on or off perform the following steps:
1)
Turn the
main power key switch
to the
off
position.
2)
Press and hold the
shaker switch
.
3) While holding the shaker switch turn the
main power key switch
to the
on
position.
4) Continue to hold the shaker switch until all indicators turn off (approximately two seconds).
5) Release the shaker switch.
6)
Pressing and releasing the
shaker switch
will alternately turn the automatic shaker feature on or off. If the feature is on the indicator on the
shaker switch will be lit. If the feature is off the indicator will be off.
7)
To save the new setting, turn the
main power key switch
to the
off
position.
The new setting will be saved and will remain in effect until it is changed again.
Summary of Contents for Exterra 56507000
