A-10 / ENGLISH
A-10
- FORM NO. 56041798 - VacRide
INSTALL THE BRUSHES
CAUTION
!
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1
Make sure the Vacuum Deck is in the RAISED position. Make sure the Key Switch
(A)
is off (O).
2
See Figure 2.
Loosen both Thumb Screws
(AA)
slide the Idler Assembly
(AB)
down and off of the vacuum deck and away from the brush.
4
Slide the brush into the housing, lift slightly, push and turn until it seats. Re-install the Idler Assemblies
(AB)
and Thumb Screws
(AA)
.
FIGURE 2
