ADTRAN TOTAL ACCESS MX2800, User Manual

Page: 133 / 142

Index
61200290L1-1 MX2800 User Manual Index-3
Diagnostics menu 6-9
Analog Network 6-3
Codec Line/Net 6-4
CSU Loopback 6-5
CSU Loopback w/BERT 6-5
Digital Diagnostics 6-8
Digital Line/Net 6-3
DS2 Loopbacks 6-9
DS2 Network 6-10
DS3 Loopbacks 6-7
Line BERT 6-6
Line Loopback 6-7
Metallic Diagnostics 6-8
Remote Loopback 6-4
,
6-9
T1/E1 Loopbacks 6-2
Tributary 6-2
Dial String menu 3-14
Dialout On Trap menu 3-15
Dialup Options menu 3-13
digital diagnostic loopback 6-8
digital line/net loopback 6-3
DS1 Eqpt Fail (NSA) 4-4
DS1 Eqpt Fail (SA), Remote status 4-4
DS1 Eqpt Fail NSA, T1/E1 Alarm Traps 3-23
DS1 Eqpt Fail SA, T1/E1 Alarm Traps 3-23
DS2 Alarm Traps 3-23
AIS 3-23
OOF 3-23
RAI 3-23
DS2 Alarms 3-17
DS2 Configuration menu 3-6
DS2 State 4-7
AIS 4-7
LOF 4-7
OK 4-7
RAI 4-7
DS2 Statistics menu 5-7
DS3 Alarm Traps Far-end Active Cards 3-22
AIS 3-22
Comn Eqpt Fail NSA 3-22
DS3 Eqpt Fail NSA 3-22
DS3 Eqpt Fail SA 3-22
Idle 3-22
LOS 3-22
OOF 3-22
RAI 3-22
DS3 Alarm Traps Near-end Active and Standby
Cards 3-21
Idle 3-21
In/Out Test 3-21
LOS 3-21
OOF 3-21
RAI 3-21
TX LOS 3-21
XCV 3-21
DS3 Alarms 3-16
DS3 Configuration menu 3-3
DS3 Eqpt Fail (NSA) 4-3
DS3 Eqpt Fail (NSA), Trap Community Name 3-22
DS3 Eqpt Fail (SA) 4-3
DS3 Eqpt Fail (SA), Trap Community Name 3-22
DS3 Framing 3-3
DS3 LED, active cards 2-14
DS3 LED, standby cards 2-15
DS3 Loopbacks 6-7
DS3 State
Alarm 4-2
In Test 4-2
Normal 4-2
DS3 State menu 4-1
DS3 Statistics menu 5-2
DS3 timing
local 3-4
DSX-1/E1 connection 2-7
DSX-1/E1 interfaces, rear panel 2-9
DSX-3 connection 2-7
DSX-3 interfaces, rear panel 2-8
E
Equipment Code menu 3-26
Error, Power Supply State 4-4
establishing a terminal connection 2-10
ETHERNET FAILURE
3-28
Excessive CV, State 4-2
Excessive Switches, System State Alarm 4-5
Ext Clk connection 2-7
F
Facility ID menu 3-26
Failure, Card A/Card B 4-6
Far End Block Errors (FEBE) 5-6
FBERR 5-8
F-Bit Errors (FBE) 5-6
FEAC 6-4
FEAC channel 3-4