Introduction
Total Access 900e Series Hardware Installation Guide
16
Copyright © 2006 ADTRAN, Inc.
64240916L1-34D
• Support for 16 ms echo cancellation
• Support for up to 48 channels of caller ID
• Provides 100 ms jitter buffer per channel
• User-friendly Web GUI, familiar AOS CLI interface, and SNMP
• LEDs for system status information
• Total Access 900e Series chassis dimensions: 1.75-inch H x 17.0-inch W x 10-inch D
• AC power: 90 to 120 VAC, 60 Hz
This hardware installation guide describes the Total Access 900e Series units, details basic functionality,
gives installation instructions, and lists unit specifications. For more information on a specific application,
refer to the quick start documents provided on your
ADTRAN OS System Documentation
CD.
Unpack and Inspect the System
Each Total Access 900e Series unit is shipped in its own cardboard shipping carton. Open the carton
carefully and avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer and Product Service
(refer to
Warranty and Customer Service
and
Product Support Information
, on page 10).
Contents of ADTRAN Total Access 900e Series Shipments
Shipments of the Total Access 900e Series units include the following items:
•
Total Access 900e Series base unit
•
A detachable power cable with a grounded IEC three-prong power plug
•
Two brackets and six screws for wall mounting
•
ADTRAN OS System Documentation
CD
The Total Access 900e Series
system is intended to be installed, maintained, and
serviced by qualified personnel only.
For additional documentation, refer to the
ADTRAN OS System Documentation
CD
shipped with the unit and available online at www.adtran.com.
