ADTRAN TOTAL ACCESS 600R, System Manual

Page: 59 / 196

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 59
S
YSTEM
U
TILITY
Use the
S
YSTEM
U
TILITY
menu to view and set the system parameters shown in Figure 5.
Figure 5. System Utility Menu
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
Select the firmware upgrade method and perform upgrade from this menu.
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
> T
RANSFER
M
ETHOD
The customer can update firmware when unit enhancements are released.
The two methods for upgrading are
XMODEM
and
TFTP
. (See the DLP section of this manual for more
information.)
TFTP
requires a TFTP server running on the network. The unit starts a TFTP client function
which gets the upgrade code from the TFTP server. Selecting
XMODEM
will load the upgrade code
through the
CRAFT
port using any PC terminal emulator with XMODEM capability. The factory default is
TFTP
.
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
> TFTP S
ERVER
A
DDRESS
This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is
configured) of the TFTP server. The factory default is no entry in the
TFTP S
ERVER
A
DDRESS
field.