ADTRAN SDG CPE, Quick Start Manual

Page: 2 / 2

SDG Wall Mount 1 QSG Installing the Wall Mount Kit
2. Drill holes using a 1/4” (6mm) drill bit into the marks on the wall.
3. Use a hammer to lightly tap the included wall anchors into the drilled holes until anchors are flush with the wall.
4. Install four screws (included) into the anchors. Leave approximately 1/4 inch (6 mm) protruding from the mounting surface.
5. Slide the wall mount over the screws and exert a small amount of downward pressure to ensure that the top of the slots are resting on the
shafts of the screws.
6. For SDG devices that have a Fiber interface, wrap any excess incoming fiber around the fiber tray.
7. Secure the wall mount cover plate (snap-in). See
Figure 2 .
8. Insert the device into the wall mount, base first. Then, snap the top support of the wall mount into place on the device.
Figure 2. Wall Mount Ready for Device
9. Once the mount is securely attached to the wall, the installation is complete.
NOTE
g
SDG device wiring, powering, and operating instructions are available in the Quick Start Guide associated with the SDG product.
All quick start guides are available online in the Service Delivery Gateways (SDGs) documentation space of the Adtran Support
Community .
Wall Mount with Cover
Wall Anchors (4x)
Additional product information, quick start guides, and
configuration guides provide additional information for
Adtran’s SDG products are available online at https://
supportcommunity.adtran.com .
For ADTRAN training inquiries, visit:
http://adtran.com/training
Access additional safety information and product documentation using the QR
code or website link.
https://supportcommunity.adtran.com
Warranty: ADTRAN will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can
be found online at www.adtran.com/warranty-terms .
Trademarks: Brand names and product names included in this document are trademarks,
registered trademarks, or trade names of their respective holders.
Copyright © 2022 ADTRAN, Inc. All Rights Reserved.
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY
HANDLING PRECAUTIONS REQUIRED
*617600192F1-13A*
ADTRAN CUSTOMER CARE:
From within the U.S. 1.888.423.8726
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807